Charcoal Making Machine

Charcoal making machine is applied to making charcoal from bamboo, wood, coconut shell, rice husk and other biomass waste. It has features of high return, low investments and wide application so that it is widely preferred by customers. Beston Machinery has focused on charcoal making machine design for about 20 years, which can supply the best charcoal machine at a fair price. Welcome to contact us!

charcoal making machine
Beston Charcoal Making Machine

Advantages of Beston Charcoal Making Machines

  • Higher Energy Utilization Efficiency

According to the testing data, the utilization rate of fuel of Beston charcoal making machine is more than 90%. We adopt double-layer design to heat the furnace at the same time to make full use of the heat. That is to say, you can save much money on fuel. In addition,  we also have a patent technology, namely, “one fire two steps carboning method”. That is to say, there is only one carbonizer furnace in our charcoal manufacturing plant to supply heat for both pre-drying and carbonization process. In this way, the heat can be utilized fully.

  • Safe and Eco-friendly Design

As mentioned, the furnace is designed with a small stove door to effectively make sure the safety of workers.  Meanwhile, the combustible gas produced in during the carbonization process can be reused as well so that it is self-sufficient in energy. It can not only save the cost but also realize a virtuous cycle. Therefore, the charcoal making machine from Beston is energy-saving and eco-friendly. In addition, we also adopt advanced treatment technology of waste gas so as to meet the European emission standards.

charcoal production equipment
Charcoal Production Equipment
  • Wide Heat Source

We can design the hot air source system according to customer’s local situation. You can use the most common and cheap fuel in the areas, thus it can realize the comprehensive use of various fuel materials such as carbon, coal, biomass, combustible gas and rubbish, etc.

  • High Profits and Low Investment Costs

The two advantages mentioned before enabling the investors to spend less on energy. So compared to other charcoal making plants, Beston biomass charcoal machine needs less investment, however, the profits you can get are more thanks to the high out yield rate of biomass charcoal.

Biomass Charcoal Making Process

Beston biomass charcoal manufacturing machine mainly use the biomass carbonization technology to process the biomass waste into biomass charcoal, and some details of the charcoal production process are listed here:

charcoal making process

1. Before putting the raw materials into the raw material, you need to make sure that the water content is below 20% and the size is around 50 mm. If not, you can use the dryer and crusher to achieve the standard.

2. The carbonization host needs pre-drying before the carbonization process begins, and when the carbonization process starts for 15-20 minutes, you can get the biomass charcoal.

3. The combustible gas produced during the carbonization process can also be recycled through the special device. The whole set of de-dusting system can clean the combustible gas, then the combustible gas is piped to the condenser, which can separate the tar and wood vinegar out. After this process, the combustible gas will be led out and used to heat the carbonization plant.

So our biomass charcoal making equipment can achieve the circulation of energy.

Model BST-05 BST-10 BST-20 BST-30
Hourly Feeding Capacity 500 kg 800-1000 kg 1500-2000 kg 2500-3000 kg
Working Method Continuous
Raw Materials 1.All kinds of biomass waste, such as sawdust, coconut shells, olive shells, palm shells, bamboo, etc.
2. Civil sludge, municipal sludge, industrial sludge, etc.
3. MSW
Reactor Size Φ800 Φ1000 Φ1300 Φ1700
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Diesel, Natural Nas, LPG, Biomass, etc.
Total Power 40 kw/h 55 kw/h 60 kw/h 72 kw/h
Floor Area (L*W*H) 30m*15m*7m 35*15*7m 45*15*10m 50*15*10m
Operating Pressure Constant Pressure
Cooling Method Recycling Water Cooling
Service Life 5-8 Years

This kind of charcoal has a higher carbon content than that of common charcoal, and the biomass charcoal can be applied to many areas:

Applications of Biomass Charcoal

1. It is great for improving the soil quality.

2. It is a suitable material to make active carbon, especially the coconut shell charcoal.

3. Higher carbon content makes the biomass charcoal is useful fuel, in addition, it is also widely used in BBQ because it is free of odor, smoke and toxin.

biomass charcoal
Biomass Charcoal

Beston charcoal making machine is suitable for investment thanks to the lower cost and higher proceeds. Contact us for more details.

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Your Industry (required)

    Your Name (required)

    Your E-mail (required)

    Phone (required)

    Company (required)

    Country (required)

    Your Message (required)