We have designed carbonization furnace for making charcoal, which can carbonize the all kinds waste, such as crop stalks, coconut shell, palm shell, sewage sludge, household waste to charcoal. Charcoal is the necessary energy in our daily life, and the biomass waste is problem needs to be solved. So making charcoal from biomass waste can balance the two aspects. With the help of the continuous carbonization furnace, the waste can be recycled, and the energy crisis can be eased to some degree.
The biomass carbonization plant for charcoal adopts double-layer design, which can make the lower part of the machine contact the hot air as much as possible. This special design can improve the heat utilization efficiency. And the dust-removal device and gas cleaner system make the working process harmless to the environment.
The Carbonization Process for Making Charcoal is as follows:
1. Check whether the raw material can reach the standard. The water content is below 20% and the size is around 50 mm. Otherwise, we can provide you with the crusher and dryer.
2. Before the carbonization process starts, you should pre-heat the host for 30 minutes.
3. The raw material will be conveyed into the carbonization host automatically and uniformly. After 15-20 minutes, you may get charcoal. The charcoal will be discharged automatically after the cooling system. As for the combustible gas, it will be cleaned by the purification system. Then it will be sent into the condenser, which can help you get the tar and wood vinegar. At last, the combustible gas is led out by the draft fan to heat the host.
| Model | BST-05 | BST-10 | BST-20 | BST-30 |
| Hourly Feeding Capacity | 500 kg | 800-1000 kg | 1500-2000 kg | 2500-3000 kg |
| Working Method | Continuous | |||
| Raw Materials | 1. All kinds of biomass waste, such as sawdust, coconut shells, olive shells, palm shells, bamboo, etc. 2. Civil sludge, municipal sludge, industrial sludge, etc. 3. MSW |
|||
| Reactor Size | Φ800 | Φ1000 | Φ1300 | Φ1700 |
| Pattern | Horizontal & Rotary | |||
| Heating Materials | Charcoal, Wood, Diesel, Natural Nas, LPG, Biomass, etc. | |||
| Total Power | 40 kw/h | 55 kw/h | 60 kw/h | 72 kw/h |
| Floor Area (L*W*H) | 30m*15m*7m | 35*15*7m | 45*15*10m | 50*15*10m |
| Operating Pressure | Constant Pressure | |||
| Cooling Method | Recycling Water Cooling | |||
| Service Life | 5-8 Years | |||
The carbon content of the biomass charcoal is higher than the common charcoal, so the charcoal is useful in many fields.
Uasges of Charcoal from Carbonizing Furnace
First, it can be as fuel in BBQ and other industries.
Second, it can improve the soil quality.
Third, it is the best raw material to make active carbon, which can purify the water and absorb noxious gas .
The tar and wood vinegar are also useful chemical material.
With the increasing demand of the biomass charcoal, it will be more profitable to buy the charcoal carbonization machine. We are looking forward to your inquiry.
Related Products
